[Elecraft] ATU question

[WØIFL]

I can help with part of this one since I use the LDG...



> Tim:
>
> >1 - As I understand it, if I attached the K2/100 to my LDG AT-11MP
> >tuner, the K2/100 would drop to twenty watts whenever I tuned. Once it
> >tuned at twenty watts I could then drop down to 5 watts and operate QRP
> >through the LDG - right?
>
> Heck, unless the LDG requires a minimum of 20W to tune, you sould even go
> lower... say 5W-10W to do the tuning.

My LDG takes from 4.5 to 6 Watts to tuning. I turn the K2 to about 5 watts
or so, tune up, then select the desired output power.   Nice tuner to hold
one over until the Elecraft ATU is available.

Ron E.
WØIFL

**snip**