[Elecraft] 817 audio better than K2?

[email protected] [email protected]
Sun Jul 28 21:36:05 2002


I've had the opportunity to compare the 817 and K2 and personally I prefer 
the K2. 

However, I must agree that the 817 has louder and stronger audio. When the 
817 was on, my daughter said, "Hey Dad, please lower that, you can hear it 
outside!" I often find that the K2's volume level must be set near max and 
it's never in danger of being too loud!

73,
Jim WA2UMP
SN: 2679


In a message dated 7/28/2002 8:44:38 PM Eastern Daylight Time, 
[email protected] writes:


> 
> Hi folks -
> 
> This weekend at Arizona's Ft. Tuthill Hamfest I had my K2 sitting side
> by side with W0PZD's Yaesu 817. The K2 was connected to an MP-1 and the
> 817 was connected to a 40M Ham stick on W0PZD's truck. Interestingly
> enough, when we switched the K2 to the Ham stick, the signal strength
> dropped noticebly....a plus for the minuscule MP-1.
> 
> However, I found it a bit humiliating (being an zealous K2 advocate)
> that the audio on the 817 was quite a bit stronger than the K2. In that
> field situation I had to turn my SSB audio to about 3 o'clock to get
> somewhere near the level of 817 audio at about 11 o'clock! When my K2 is
> home at the base station I never have to turn the audio beyond 12 noon.
> (BTW voltage indicator stated 11.8 volts). Is the 817's audio
> amplification just plain stronger or is this an indication that my K2's
> audio needs tweaking (and how would I do it?).
> 
> All comments are most appreciated. Wayne, Eric? Can you jump in on this
> question?
> Thanks all. 73/Tim NZ7C
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list. 
> Postings must be plain text (no HTML or attachments). 
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> 



--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---