[Elecraft] KPA100

[JIm Wilson]

I must have missed something!  I can find no references to a VFO ALC mod on 
the K2 main board.
Help anyone?

Jim


At 09:47 AM 7/18/2002, Christian GONDARD wrote:

>Hi K2'ers & K1'ers
>...
>I encountered only a small difficulty after completing the VFO ALC
>modification which is proposed with the KPA100 kit. It requires 4 new
>components on the K2 main RF board : 3 replacements and 1 new component.
>After the modification, I loosed the TX power ... After some good advices
>from Gary, I found the culpritt : the linear pad between C154 and a
>connected resistor was cut from the circular pad at one of C154 lead :
>effect : no more VFO TX signal and nothing on all the TX line. I need only
>the RF probe and a DVM to find the fault; the faulty pad was very difficult
>to see with a magnifying glass .. I repaired it with a 5 mm long component
>lead.
>
>Thanks again to the Elecraft team for the wonderfull design and services
>
>I am now waiting for the KAT100 !!
>
>73's
>
>Chris / F6FTB / K2 #644
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.377 / Virus Database: 211 - Release Date: 7/15/2002


--- StripMime Report -- processed MIME parts ---
multipart/mixed
  text/plain (text body -- kept)
  text/plain (text body -- kept)
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---