[Elecraft] Lost sidetone

Sun Jul 21 10:47:00 2002

I tried what you mentioned but did not get the sidetone back.  Any other suggestions?
   Kevin.

7/20/2002 11:02:12 PM, [email protected] wrote:

>Kevin wrote:
>
>"Has anyone lost the sidetone on the K2?  For some reason I don't have
>the tone on CW when I transmit, on CW in the test mode, nor do I have
>spot when I try to zero beat another station.  It was working fine then
>it was gone an hour later.  I check the tone and level settings and they
>are just as I left them.  Tone was at 600 Hz and level was at 32.  I
>changed the level but that did not bring back my sidetone."
>==========
>It sounds like you have been bitten by the same anomaly that I and others
>have bitten by and have inadvertently mis-set the sidetone source in the
>menu.
>
>Go to primary menu item ST-L.  With the loudness parameter underscored,
>tap DISPLAY.  If you have the K2 I/O option (or the KPA100) it should be
>set to "U8-4", otherwise it should be set to "U6-25".  (Each tap of the
>DISPLAY button toggles it between these two parameters).
>
>73, de Earl,
>_______________________________________________
>Elecraft mailing list: [email protected]
>You must be a list member to post to the list. 
>Postings must be plain text (no HTML or attachments). 
>See: http://mailman.qth.net/mailman/listinfo/elecraft
>Elecraft Web Page: http://www.elecraft.com
>