[Elecraft] KPA100 SWR adjustment problem

[Helmut Usbeck]

On Saw,turday 06 July 2002 15:12, Michael E Dobson wrote:

<snip>
  Also, R26/27 should be at their mid-points for the SWR calibration, they 
will be adjusted in a later step using a calibrated wattmeter.

The ass'y manual says these pots should be all the way clock-wise.  Is the 
above an "official" change to the adjustment or something you tried that 
makes the calibration easier.  The ATU is driving me a bit batty also.  But 
what the heck at about 1900 last night hit tune on 7.112 Mhz, called CQ and 
had AH6E come back, which a 54N report for me.  The 10 Watts must be working.
Can't seem to get across the river to NJ though.   

Regards,
Helm.  WB2ADT  (#2698)