[Elecraft] KPA100 Resistor R9

[G. Thisell]

The only resistor I have left is 
Brown  1:st figure = 1
Black  2:nd figure = 0
Black  3:d  figure = 0
Black  4:th figure = multiplication = 0
Brown  Tolerance

So R9 is supposed to be 10 ohms but seems in my case to be 100 ohms.
Can be checked on line. (With the resitor in place..)
The resistor has to do with bias set, so it might be critical...

I have probably mixed it all up, so I will have to check again..

Best regards

Joe
SM5BFK