[Elecraft] KPA100

[Tom Hammond NØSS]

Hi Leo:

I, too, have mine marked... but... in BOTH instances where I swapped the 
cables, I had opened up the K2 in order to show the 'guts' to several 
onlookers in a crowd. As I was reassembling the K2 (and talking with the 
onlookers at the same time!) I just lost track of where I was and got them 
switched. At that point in time colors had no meaning as I was mostly 
concentrating on answering wuestions from the folks in the crowd.

73,

Tom  N0SS

At 10:21 AM 7/5/02, Leo Starrenburg PA5LS wrote:
>Hi Lyle,
>
>thank you for the quick reply.
>
> > Protection in case the RF and AUX PWR cables are accidentally swapped.
> >
>
>As I will put the KPA and big KAT in an EC2, swapping will be far and few
>between, if any. When I installed the internal battery in my K2, I marked
>(as indicated in the manual) the power and RF connectors red and blue
>respectivly. On the inside of the side panel I put legends in the same
>colours. This has kept me from bundling up  -sofar- !
>
>I will leave things as they are for now, should I have to take of the K2's
>heathsink I'll put the cap. in as well.
>
>73' Leo.
>
>
>_______________________________________________
>Elecraft mailing list: Elecraft@mailman.qth.net
>You must be a list member to post to the list.
>Postings must be plain text (no HTML or attachments).
>See: http://mailman.qth.net/mailman/listinfo/elecraft
>Elecraft Web Page: http://www.elecraft.com