[Elecraft] MixW2 and K2s...

Tue Jan 15 15:09:05 2002

Steve, I use the K2 and MixW.  Just set the radio type to Kenwood.  I don't
remember having to do anything else.  If you have trouble, let me know and
when I'm home I can give you more info.
----- Original Message -----
From: "Steve Banks" <[email protected]>
To: "Elecraft Corporation" <[email protected]>
Sent: Tuesday, January 15, 2002 1:31 PM
Subject: [Elecraft] MixW2 and K2s...


> Hi Everyone-
>
> I'm wondering if anyone on the reflector has run his/her K2 using MixW2
> software, AND has found a way to use the MixW "TRCVR CAT/PTT..." function
> successfully.
>
> That is, do any of the manufacturers' rig listings (Yaesu, Knwd, Icom,
etc.)
> and their associated CAT programs work with (i.e. emulate) the K2?
>
> MixW works well, and the K2 rocks and rolls very well in all modes I've
> tried in Mix; but the CAT function (especially being able to have the K2
> "talk" to the Frequency column in the log) would be really handy to have
> functional.
>
> BTW, the MFSK16 signal reports with my K2 running a few watts are
> incredible...the error-correcting capability of the mode is great!
>
> Thanks for any advice, and 73
>
> Steve
> K0PQ
> K2 S/N 1599
>
>
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>