[Elecraft] K1 build question (batteries)

Wed Feb 27 15:11:00 2002

If you do use a large battery, or any high current capacity DC supply  -
be sure to fuse the power leads to the K1 or K2 so a short circuit inside
the rig does not vaporize the PCB traces. Put the fuse as close as
possible to the battery or DC supply terminals. A short inside the DC
coaxial connector can instantly destroy the connector and the power
cable.

Gary Surrency AB7MY

On Wed, 27 Feb 2002 11:13:37 EST [email protected] writes:
> I like your idea but a much smaller battery will do the trick and not 
> be so 
> heavy to lug around or as expensive.  I have used a 4.5 ah battery 
> for days 
> and I suspect you could go to a 2.5 ah.  NiMH AA's can provide 1.5 
> ah for 
> afternoon outings.
> 
> Radio K4IA
> Craig Buck
> Fredericksburg, Virginia 22401 USA
> 
> FISTS CW CLUB #  6702 CC 788 Diamond #64
> QRPARCI # 2550
> K1 #470 K2# 2460
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list. 
> Postings must be plain text (no HTML or attachments). 
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> 

Gary Surrency AB7MY
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.