[Elecraft] PLL range after BFOMDKT ?

[John, KI6WX]

Nick;
That range is reasonable, and is greater than some folks have acheived with
this mod.  You only need a range of 9.002 kHz to tune to the bottom of the
160 meter band.
-John
 KI6WX
----- Original Message -----
From: "Nick Frost" <nickf@basenji.com>


> Dear Elecrafters;
>
> After performing the BFOMDKT, the PLL
> range on my K2 is 10.96khz whereas the manual
> states an 11.5khz range is minimum.  Is this
> acceptable or is there a fix for the reduced
> PLL range after the BFOMDKT install?  (R19
> on the bottom of the RF board on my K2 is
> 2.678 Kilo-ohms and is between pins 7 and 8
> of RP2.)
>
> Thanks,
> -Nick