[Elecraft] PLL range after BFOMDKT ?

[Nick Frost]

Dear Elecrafters;

After performing the BFOMDKT, the PLL
range on my K2 is 10.96khz whereas the manual
states an 11.5khz range is minimum.  Is this 
acceptable or is there a fix for the reduced
PLL range after the BFOMDKT install?  (R19
on the bottom of the RF board on my K2 is
2.678 Kilo-ohms and is between pins 7 and 8
of RP2.)  

Thanks,
-Nick