[Elecraft] Astron Linear Power Supplies
Jim W7RY
Jim W7RY" <[email protected]
Sat Dec 21 19:17:00 2002
Well said Roy and I agree 100 %.
I have been in the 2-way radio business for 20+ years and have had excellent
luck with the Astron linear supplies.
I am using a SS-30 here in the shack and it works well too! No noise issues
at all.
73
Jim W7RY
----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Saturday, December 21, 2002 3:40 PM
Subject: [Elecraft] Astron Linear Power Supplies
> For what its worth, I have used Astron Power Supplies for many years. I
have
> two VS35M supplies, one RS20A supply, and one RS12A. I used the RS12A
when I
> was running the K2 without the KPA100. Anyone who is running a 100 watt
> transceiver can use a RS20A with full confidence. The foldback current
> limiting will not activate on this power supply at 20 amps and it even
runs
> relatively cool. So don't worry about using the RS20A with your K2 and
you
> just might save yourself some money. If you do not intend to run anything
> else but the K2/100 and KAT100, you dont need the Astron RS or VS35M. The
> transformer and those two 3771 pass transistors on the heatsink of the 20A
> will power the K2/100 with no sweat! All of my power supplies are very
> quiet. I just keep them out of the range of the K2 (a foot or so).
> Occasionally there is a mechanical vibration that is cured by either
touching
> the top of the cabnet or setting something on the top. Roy Morris W4WFB
> KAT100, K2/100 #2225
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
> text/plain (text body -- kept)
> text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>
>