[Elecraft] kat2 problem after battery install cured

[Don Wilhelm]

Gary,

If the Yaesu FT-900 tuning knob interests you, you can take a look at it on
my website http://www.qsl.net/w3fpr.

The FT-900 knob is heavier than the stock K2 knob and has a 'rounded' front
edge.  It does not have a spinner dimple like the FT-100 knob, but then the
FT-100 knob is smaller.  I particularly like the heft to the FT-900 knob.

73,
Don W3FPR
----- Original Message -----
From: "Gary Lee" <kb9zuv@arrl.net>
To: <elecraft@mailman.qth.net>
Sent: Wednesday, December 18, 2002 6:33 AM
Subject: [Elecraft] kat2 problem after battery install cured


> k2 #1982 lives again.  Turned out to be the cable to the kat2 not quite
> seated all the way down.
>
> Thanks to Wayne an others.
>
> Now for one last question.
>
> Installed k9fi's spinner mod last night.  However, I think I would like a
> somewhat heavier tuning knob.
>
> Could someone please describe the yaesu knob for me?  How is it in terms
of
> size, wait, etc to the stock k2 knob?
>
> Thanks for all information.
>
> Gary Lee
> kb9zuv
>
>
> _______________________________________________
> Elecraft mailing list: Elecraft@mailman.qth.net
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>