[Elecraft] Spectogram - more confusion

[Tom Hammond NØSS]

Tim

>Like I said. I was using the REV button and not the cw rev button (dahhh).
>However, I then adjusted the BFO for cw rev and now I have the identical
>number for rev and normal: Example: Filter 1 is 175 normal and 175 reverse;
>filter 2 is 165 normal and 165 reverse. Now what have I done wrong?
>when I first built the K2, for example, filter 1 was 171 normal and 202
>reverse.

And it should STILL be somewhere around there.

What you have done is to place both your CW Norm and your CW REV BFOs on 
the SAME side of the filter, thus giving you the SAME sideband for both 
settings.

Go to  CW REV | CAL | FIL, select the desired filter and than crank on the 
VFO knob (UP) until the background noise goes bassy and back up on the 
other side of the filter. THen set your BFO on THAT side of the filter.

73,

Tom  N0SS