[Elecraft] Weird K2 SSB Operation

[Eric Swartz WA6HHQ - Elecraft]

Sounds like you have your BFO for BF1t set inside of the filter bandwidth
for USB on 18 Mhz and below. (We flip the mixing scheme above 18 MHz, so
this is the same as LSB above 18 MHz. If the BFO is inside the filter you
will see a fair amount of carrier leak through.

it should be about 300 Hz (+/- personal preference) outside of the OP1
filter edge. 

73, Eric  WA6HHQ
-------------------


Lee Buller wrote:
> 
> K2/100 - with SSB Adapter 1.07v
> 
> 1.8 to 18 Mhz transmitts OK in lower sideband....upper sideband the rig
> keys to the set power
> 
> 21 to 28 Mhz transmitts OK in upper sideband....lower sideband the rig keys
> to the set power.
> 
> Anyone have any ideas?
> 
> Mike is a Yaesu MH31 hand mike.  Pin 8 = AF  Pin 7 = ground  Pin 6 = PTT
> and Pin 5 = gound
> 
> Lee - K0WA
> 
> _______________________________________________
> Elecraft mailing list: Elecraft@mailman.qth.net
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com