[Elecraft] NZ7C: K2/100 & LGD MP-11 questions

Wed Aug 28 17:25:59 2002

Tim,

Make sure you have the LDG set to Auto and not Semi-Auto.  I use the same
model tuner you have and when I hit the K2 Tune button the LDG relays
start clicking if the SWR is too high.  Remember, the LDG will not tune
automaticly until the SWR goes above 3:1 per the LDG manual so sometimes
you have to hit the LDG tun ebutton to get the best match.  

I hear a beep when I start and stop the tune on the K2.

73,
Mike WA3KYY K2/100 #2221

On Tue, 27 Aug 2002 19:12:13 -0700 Tim and Nancy Logan
<[email protected]> writes:
> Hi folks - 
> Well, so far everything seems a go with my K2/100. Howvere, when I 
> hook it up to my LDG tuner (the large one, not the little Z-11) I
cannot 
> get the K2 to activate the tuner unless I push the tune button on the 
> LDG If I do press the tune button it seems to tune properly. Shouldn't 
> the K2 automatically activate the LDG?
> 
> Also, when I did the transmit tests into a dummy load and pressed 
> tune, I could here the tune tone. When I have the K2 hooked to the LDG
and 
> hit tune, I do not hear the tune tone. Is that to be expected?
> 
> Thanks for your help.  73/Tim

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.