[Elecraft] NZ7C: K2/100 question continued

[Tim and Nancy Logan]

Hi folks - Several of you straightened me out on DC scale vs AC scale.
Thank you. As it turns out I WAS using the DC scale - not the AC as I
incorrectly said in my first email.

Now to repeat, everything has gone very well and all tests have been
passed
up to page 47 of the K2/100 manual on the Bias Current Adjustment.
Again, I'm an assembler so I don't even know what bias current
adjustment means.

Using the DC scale with a 10 amp range, at .1 watts it read .035 A.
(35mA)....way below the 200-400mA range I'm  supposed to see. At 11
watts it says .055 A (55mA).

I don't really know where to go from here - any ideas? Thanks again.

73/Tim NZ7C