[Elecraft] K2 testing

[peter gerba]

Hi Fran;

Thanks very much for the note.

I spoke with Scott at Elecraft.  Scott spotted the problem quickly..a diode 
(d4) in reverse position.  I took the rig to work and removed the 1007 with 
a desoldering station and all is well.  The problem was as you guessed, in 
the current sensing circuit.

Thanks, pete kn6bi

At 09:31 AM 8/21/02 -0400, you wrote:
>On: Sunday, August 18, 2002 2:55 PM
>"peter gerba" <pgerba@earthlink.net>
>wrote:
> > ...
> > Now (and this may be the real problem) when the power level is set to 2
> > watts. I read "High Current" on 40 Meters, with the watt meter reading abt
> > 10 watts. On the 30 meter test the power level was again set at 2 watts