[Elecraft] k2 testing

[peter gerba]

Hi to all;

Hello Houston..

I'm in the the "Alignment and Test Part III" with my K2 and have a problem.

When I key the rig on 40 meters with the power set at 2 watts I receive a 
"High Current" warning.  At power levels under about  1.5 watts all's 
well.  I tried the other bands and they seem fine..though they aren't 
adjusted. Some (30M) output 10 watts with no High Current  warning. I have 
a watt meter and 50 ohm load on the output. Current Cal is set to 3 Amps. 
Power is a Battery.  I have the usual test equipment here.

I need a starting point for the search.  Should I be looking in the 40 
meter circuit or elsewhere ?

I'll be listen on all the regular frequencies for a response.. over

pete kn6bi