[Elecraft] Help....I dont have a Side Tone anymore.

[Don Brown]

Hi

This seems to happen almost as much as the internal/external voltage swit=
ch in the wrong position indicating LOW BATTERY. =20

The K2 can get its sidetone from 2 different pins on the MPU. If you have=
 the KIO2 or KP100 you need the source to be U8-4. Tap menu select sideto=
ne level, hold menu to select then tap display to alternate between U6-25=
 and U8-4. When you have the right one you will hear the sidetone. The re=
ason for this is U6-25 is the RS232 pin and is needed for the computer I/=
O so the sidetone was moved to U8-4

Don Brown
KD5NDB

----- Original Message -----
From: Phillip Townsend
Sent: Thursday, August 15, 2002 11:24 AM
To: Elecraft
Subject: [Elecraft] Help....I dont have a Side Tone anymore.

Side tone dont work....
I have the following kits installed in my K2:
Battery
Sideband
A filter
Noise Blanker
ATU
Serial interface...
I dont CW much but it should work anyway...
Ideas???
Thanks in advance
Phil
_______________________________________________
Elecraft mailing list: Elecraft@mailman.qth.net
You must be a list member to post to the list. =20
Postings must be plain text (no HTML or attachments). =20
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---