[Elecraft] K2 ATU Question

[WØIFL]

Been there done that!!
Similarly, you only get 20W out with the KPA100 whilst tuning.  I remember
this throwing me a bit.
You can adjust the power knob a bit while in the Tune mode causing the power
out to change to the setting dialed in via the power knob.

Ron E .
WØIFL


----- Original Message -----
From: <K6TFZ@aol.com>
To: <elecraft@mailman.qth.net>
Sent: Tuesday, August 06, 2002 08:53
Subject: Re: [Elecraft] K2 ATU Question


> I now understand the "problem". There isn't one. When pressing "Tune", the
> power out is limited to 3 watts. If I call for 5 watts and then Tune using
> the ATU, I only get 3 watts. But, if after tuning up, I use a key, the
> external wattmeter show the requested power out. I remembered reading this
> previously but it didn't register when doing the actual operation. Sorry I
> wasted all of your time.
> Jeff, K6TFZ
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> _______________________________________________
> Elecraft mailing list: Elecraft@mailman.qth.net
> You must be a list member to post to the list.
> Postings must be plain text (no HTML or attachments).
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
>