[Elecraft] INFO 232 message on 160

[Pete Sutherland]

Afternoon all,
Just completed installing the K160RX module.
All seems well until I try to do the CAL PLL per the instructions.
I've tuned the unit to 1800.10 and run the test.  About 2 seconds into the
test I get the INFO 232 message.  The unit appears to be functioning
properly (ie good signals in and 10+ watts out).  I retried the test on 40
meters and all is well there.  Any suggestions?

Thanks

Pete - WD6DKW
K2-2302