[Elecraft] K2 CW TEST MODE

[kc4kgu@ENTERZONE.NET]

I'm not sure.  I assume it's the latest and greatest.  


On Mon, 1 Apr 2002, Ron D' Eau Claire wrote:

> > Just reproduced the same problem on K2 #2490 without changing bands.  I
> > simply went to test mode, sent 3 v's, went back to operate mode and until
> > I moved the power knob (which was full clockwise), no power out.
> >
> > Note: This only happens when first powering on.  If I then change back to
> > test mode, send some code, and back to operate, I don't have to move the
> > power knob.
> >
> > 73 de John - KC4KGU
> > K2 #2490
> 
> Which firmware? I'm using 2.01H. It appears that different K2's are behaving
> differently...
> 
> It appears that powering ON produces the same condition as changing bands.
> But on my K2 it doesn't matter how often I switch between TUNE and OPER, I
> don't get any RF power out until one of the following events occur:
> 
> 1 - Press TUNE.
> 
> 2-  Change the POWER control position.
> 
> 3 - Change Bands
> 
> 4 - Cycle the POWER off and on.
> 
> Which firmware are you using, John? I am equipped with Ver 2.01H
> 
> Ron AC7AC
> K2 # 1289
>