[Dxbase] 60M

N2TK, Tony tony.kaz at verizon.net
Fri Dec 4 16:13:29 EST 2015


Hi Merv,
I was trying to find a way that if I click on a DX callout I needed it would
put the rig in the correct frequency and mode.
73,
N2TK, Tony

-----Original Message-----
From: Dxbase [mailto:dxbase-bounces at mailman.qth.net] On Behalf Of Merv
Schweigert
Sent: Friday, December 04, 2015 3:38 PM
To: dxbase at mailman.qth.net
Subject: Re: [Dxbase] 60M

Mine works fine on any band 60 included,  I have the box checked to take
band and mode info from the transceiver,  so whatever the radio is set at is
what is logged.

73 Merv K9FD/KH6

> There had been some discussion about the wrong mode being logged with 
> DXBase on 60M. I tried a fix in the bandmap. Preliminary checking 
> seems to work fine. This may not work for those outside North America. 
> We are quite restricted to just 5 channels only with fixed frequencies 
> for CW and SSB so this seems to work here. I clicked on DX callouts 
> from the DX window. It sets up my K3 to the correct freq and mode. I 
> tried logging some calls based on the frequency and mode of the K3 and 
> it entered properly in the log. So far so good. I don't know if I missed
anything yet.
>
>   
>
> As an example in the bandmap.
>
>   
>
> Start frequency - 5403
>
> End frequency - 5404
>
> Mode - USB
>
>   
>
> Start frequency - 5405
>
> End frequency - 5405
>
> Mode - CW
>
>   
>
> I did a similar thing to all 5 channels.
>
>   
>
> 73,
>
> N2TK, Tony
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>

______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



More information about the Dxbase mailing list