[Dxbase] 60M

[Merv Schweigert]

Mine works fine on any band 60 included,  I have the box checked
to take band and mode info from the transceiver,  so whatever the
radio is set at is what is logged.

73 Merv K9FD/KH6

> There had been some discussion about the wrong mode being logged with DXBase
> on 60M. I tried a fix in the bandmap. Preliminary checking seems to work
> fine. This may not work for those outside North America. We are quite
> restricted to just 5 channels only with fixed frequencies for CW and SSB so
> this seems to work here. I clicked on DX callouts from the DX window. It
> sets up my K3 to the correct freq and mode. I tried logging some calls based
> on the frequency and mode of the K3 and it entered properly in the log. So
> far so good. I don't know if I missed anything yet.
>
>   
>
> As an example in the bandmap.
>
>   
>
> Start frequency - 5403
>
> End frequency - 5404
>
> Mode - USB
>
>   
>
> Start frequency - 5405
>
> End frequency - 5405
>
> Mode - CW
>
>   
>
> I did a similar thing to all 5 channels.
>
>   
>
> 73,
>
> N2TK, Tony
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>