[Dxbase] Dxbase with my Kenwood TS-480

[Bruce Huyck]

What operating system is on your PC?  I had a world of problems getting my
Win 7 Professional 64 bit machine to talk to the 480. The are some issues
with certain USB to serial adapters.  
You also  have to set menu option 56 for com port speed to match your
software.

-----Original Message-----
From: dxbase-bounces at mailman.qth.net [mailto:dxbase-bounces at mailman.qth.net]
On Behalf Of rharris283 at aol.com
Sent: Friday, November 11, 2011 9:38 AM
To: dxbase at mailman.qth.net
Subject: [Dxbase] Dxbase with my Kenwood TS-480


Now that I have determined the Piexx board in my TS-940 is not working
properly (maybe), I have hooked up my TS-480 and still have trouble with
settings. WOW never had trouble when computers had serial ports! Drivers
were installed for the cable (usb to serial) and device manager says its
working. I set port settings as follows for the TS-480: 

Baud  4800
data  8
parity  none
stop bits 1 also tried 2

Have tried with all combonations of DTR, RTS CTS settings

Have lso tried another program HR Deluxe that I have used before to get
connections (using auto detect. Still cant connect.

Bob
WB2UBW
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html