[Dxbase] DxBase and DX Atlas

[Greg Engle]

Also here on Win 7 64 SP1 and DX Atlas 2.25

Greg
N6PYI

-----Original Message-----
From: dxbase-bounces at mailman.qth.net [mailto:dxbase-bounces at mailman.qth.net]
On Behalf Of ILYA ZOZIN 4Z1UF
Sent: May 09, 2011 1:00 PM
To: dxbase at mailman.qth.net
Subject: Re: [Dxbase] DxBase and DX Atlas

Running here DX Atlas ver. 2.25 with Dxbase 2007, on XP Pro 2002 (SP3)
system, works just fine.

73! ILYA de 4Z1UF 

> -----Original Message-----
> From: dxbase-bounces at mailman.qth.net [mailto:dxbase- 
> bounces at mailman.qth.net] On Behalf Of Dave Gmail
> Sent: Monday, May 09, 2011 10:34 PM
> To: 'KB1FJ'; dxbase at mailman.qth.net
> Subject: Re: [Dxbase] DxBase and DX Atlas
> 
> Same here, Neil is aware, but no solution yet...   op: win 7(64B)
> 
> 
> 
> 
> Dave ve3wej/ve3ie
> 
> 
> 
> -----Original Message-----
> From: dxbase-bounces at mailman.qth.net [mailto:dxbase- 
> bounces at mailman.qth.net] On Behalf Of KB1FJ
> Sent: May-09-11 9:30 AM
> To: dxbase at mailman.qth.net
> Subject: [Dxbase] DxBase and DX Atlas
> 
> I am running XP Pro Version 2002 with SP3.  I recently upgraded to a 
> new mother board and a AMD Phenom 9850 Quad-Core processor. In doing this
I
> installed a new copy of DxBase 2007 and a new DX Atlas ver. 2.25.   At
first
> DxB could not find DX Atlas.  Several computer restarts later and a 
> re-install of DX Atlas, DxB found DX Atlas.  It opens it and a few 
> seconds later both DxB and DX Atlas shut down.  I have just enough 
> time to see if
I
> can control DX Atlas and I can move the MAP around before it shuts down.
> Also, while it is open, DxB will not let me do anything with it like 
> talk
to
> Ve7cc.  It is like it is frozen.  I have both programs opened on 
> separate monitors so I can easily move between them.  But, 5 or 6 
> seconds is all I get before they shut down.
> 
> 
> 
> I have remove all programs I think may be in conflict from my start-up 
> folder thinking the problem may be somehow connected to other programs.
By
> the way,  I am running VE7CC VER. 2.3971.  It does communicate with 
> DxB in that new spots will show up in DxBase during those 5-6 seconds 
> that both
DxB
> and DX Atlas are actually running together but DxB will not talk to VE7CC.
> 
> 
> 
> I believe that DX Atlas is working ok as a standalone program and I 
> also believe that DxBase is working ok as a standalone program.  Just 
> not good together.
> 
> 
> 
> Both programs worked together before I upgraded.  However,  I was 
> using
ver
> 2.21 of DX Atlas then.  Maybe I will try to get another copy of 2.21 
> and start over.
> 
> 
> 
> Any help would be greatly appreciated.
> 
> 
> 
> Thanks, Ben KB1FJ
Please help support this email list: http://www.qsl.net/donate.html