[Dxbase] DxBase and DX Atlas

[ILYA ZOZIN 4Z1UF]

Running here DX Atlas ver. 2.25 with Dxbase 2007, on XP Pro 2002 (SP3)
system, works just fine.

73! ILYA de 4Z1UF 

> -----Original Message-----
> From: dxbase-bounces at mailman.qth.net [mailto:dxbase-
> bounces at mailman.qth.net] On Behalf Of Dave Gmail
> Sent: Monday, May 09, 2011 10:34 PM
> To: 'KB1FJ'; dxbase at mailman.qth.net
> Subject: Re: [Dxbase] DxBase and DX Atlas
> 
> Same here, Neil is aware, but no solution yet...   op: win 7(64B)
> 
> 
> 
> 
> Dave ve3wej/ve3ie
> 
> 
> 
> -----Original Message-----
> From: dxbase-bounces at mailman.qth.net [mailto:dxbase-
> bounces at mailman.qth.net]
> On Behalf Of KB1FJ
> Sent: May-09-11 9:30 AM
> To: dxbase at mailman.qth.net
> Subject: [Dxbase] DxBase and DX Atlas
> 
> I am running XP Pro Version 2002 with SP3.  I recently upgraded to a new
> mother board and a AMD Phenom 9850 Quad-Core processor. In doing this I
> installed a new copy of DxBase 2007 and a new DX Atlas ver. 2.25.   At
first
> DxB could not find DX Atlas.  Several computer restarts later and a
> re-install of DX Atlas, DxB found DX Atlas.  It opens it and a few seconds
> later both DxB and DX Atlas shut down.  I have just enough time to see if
I
> can control DX Atlas and I can move the MAP around before it shuts down.
> Also, while it is open, DxB will not let me do anything with it like talk
to
> Ve7cc.  It is like it is frozen.  I have both programs opened on separate
> monitors so I can easily move between them.  But, 5 or 6 seconds is all I
> get before they shut down.
> 
> 
> 
> I have remove all programs I think may be in conflict from my start-up
> folder thinking the problem may be somehow connected to other programs.
By
> the way,  I am running VE7CC VER. 2.3971.  It does communicate with DxB in
> that new spots will show up in DxBase during those 5-6 seconds that both
DxB
> and DX Atlas are actually running together but DxB will not talk to VE7CC.
> 
> 
> 
> I believe that DX Atlas is working ok as a standalone program and I also
> believe that DxBase is working ok as a standalone program.  Just not good
> together.
> 
> 
> 
> Both programs worked together before I upgraded.  However,  I was using
ver
> 2.21 of DX Atlas then.  Maybe I will try to get another copy of 2.21 and
> start over.
> 
> 
> 
> Any help would be greatly appreciated.
> 
> 
> 
> Thanks, Ben KB1FJ
> 
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html