[Dxbase] DXCC Report substitutions

[David VE3VID]

Yes, that worked, thanks.
Question:  when I "compute" the list, it asks "Do you want to set the AWARD field to CREDITED?   I assume this is something I would do after my cards come back from the 'checker'.  But it also asks, "Do you want to CLEAR the SELECT fields?"  Why would I do that?  The previous problem might recur with a different DXCC.
(I'm going back to my manual to read more about award tracking)David

http://www.ve3vid.webs.com/


From: wa6axe at hotmail.com
To: ve3vid at hotmail.com
Subject: RE: [Dxbase] DXCC Report substitutions
Date: Sun, 21 Aug 2011 12:25:53 -0500








You also need to make sure that you have the DXCC AWARD module 

CHECKMARKED for the  "Select Marked QSO Records"


Joe wa6axe

> From: ve3vid at hotmail.com
> To: al9a at mtaonline.net; dxbase at mailman.qth.net
> Date: Sun, 21 Aug 2011 13:14:19 -0400
> Subject: Re: [Dxbase] DXCC Report substitutions
> 
> 
> Hi Gary.  Instructions clear and understood.  However it did not work.  
> None of the DXCC check boxes were populated in the entries I wanted removed. Once I put the check mark in the desired QSO select-dxcc-check-box,  it certainly became highlighted,  but when I ran INITIALIZE TABLES and produced the report again.  The old QSL data was still on the report.
> Not sure what I am doing wrong.
> David
> 
> http://www.ve3vid.webs.com/
> 
> 
> > From: al9a at mtaonline.net
> > To: ve3vid at hotmail.com; dxbase at mailman.qth.net
> > Subject: Re: [Dxbase] DXCC Report substitutions
> > Date: Sat, 20 Aug 2011 16:18:03 -0800
> > 
> > David,
> > 
> > Go to the Select field for the card you do not want.  Make sure the box is 
> > not highlighted in green.  If it is green a flag has been set to Select this 
> > record.  Click on the drop box arrow and uncheck the DXCC award and close 
> > the box.  Now go the record you do want DXB to use in the DXCC report and 
> > again go to the Select field.  Click on the drop box and check DXCC and 
> > close the box.  It should now be green.  This record will now be selected in 
> > your report.
> > 
> > 73,
> > Gary AL9A
> > 
> > 
> > ----- Original Message ----- 
> > From: "David VE3VID" <ve3vid at hotmail.com>
> > To: <dxbase at mailman.qth.net>
> > Sent: August 20, 2011 3:42 PM
> > Subject: [Dxbase] DXCC Report substitutions
> > 
> > 
> > >
> > > I printed my first DXCC report but alas I have lost a couple cards and 
> > > need to substitute other cards from the same countries.  How do I tell 
> > > DxBase to disregard its first pick and accept a substitute for a certain 
> > > country so it will appear on the DXCC report print out?
> > > ThanksDavid
> > >
> > > http://www.ve3vid.webs.com/
> > >
> > > ______________________________________________________________
> > > Dxbase mailing list
> > > Home: http://mailman.qth.net/mailman/listinfo/dxbase
> > > Help: http://mailman.qth.net/mmfaq.htm
> > > Post: mailto:Dxbase at mailman.qth.net
> > >
> > > This list hosted by: http://www.qsl.net
> > > Please help support this email list: http://www.qsl.net/donate.html 
> > 
>  		 	   		  
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html