[Dxbase] K1EL Winkeyer USB

[Jack]

Tom,

The ICONs for switching between radio1 and radio2 only control which radio 
is accessed when retrieving or sending frequency/mode info.  It has nothing 
to do with the keyer interface.  There is nothing in DXbase that switches 
the Winkey between two different radios.  Perhaps there is a manual switch 
on the Winkey that lets you direct the keying between different radios, I 
don't really know.  But as far as DXbase is concerned, the keying is sent 
from DXbase to the Winkey and where it goes after that is controlled in 
Winkey.

Regards,
Jack

----- Original Message ----- 
From: "Tom Lewis" <n4tl2 at earthlink.net>
To: "dxbase" <dxbase at mailman.qth.net>
Sent: Saturday, October 10, 2009 7:30 AM
Subject: [Dxbase] K1EL Winkeyer USB


>
> I added a K1EL Winkeyer USB to my station. In stand alone mode it keys
> radio one or two fine.
>
> With DXbase 2007 I can't get it to change between radios. The "Use Radio 
> 2"
> icon up or down does not matter.
>
> Does anyone know how to get it to switch between radios?
>
> Thanks
> Tom, N4TL
>
>
>
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>