[Dxbase] Win 7 & DXBase Generated CW

[Gary AL9A]

Good luck with that Al!  I run DXB2006 and have never been able to get DXB 
to generate CW with its internal keyer.  This was under Win98, WinME, WinXP 
and now Vista 32 bit.  I finally got it to work after I added a Microham 
Microkeyer II to the shack and selected the K1EL Winkey keyer option rather 
than the DXB internal CW keyer.  Works like a champ now!

73,
Gary AL9A



----- Original Message ----- 
From: "Al Burnham (K6RIM)" <k6rim at pacbell.net>
To: "DXBase Reflector" <dxbase at mailman.qth.net>
Sent: November 02, 2009 1:10 PM
Subject: [Dxbase] Win 7 & DXBase Generated CW


> Just got a Win 7 (32-bit) computer and have been loading and configuring
> software.
>
> DXBase works fine, except that, so far, I cannot get it to generate CW
> using the internal DXBase keyer.
>
> Possibly cockpit trouble, but, yes, I did run dxbdvr and restart the
> computer, but no joy.
>
> Has anyone using Win 7 run into this issue, or is it just me?
>
> With thanks and 73,
>
> Al, K6RIM
>
>
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html