[Dxbase] HF radio failed to respond

[FireBrick]

First Question: How many comports does your computer physically have?
Second Question: Did you check 'System' to indeed see if the comports were active? What 
are it's parameters?
Third Question: Do you have any other devices connected to the computer that is using a 
comport?
Forth Question: What type of computer, what type of OS?


----- Original Message ----- 
From: <harold73 at telefonica.net>
To: <dxbase at mailman.qth.net>
Sent: Monday, January 30, 2006 10:30 AM
Subject: [Dxbase] HF radio failed to respond


>I have changed my computer and now cannot get the radio to respond.
>
> My settings are:-
>
> Yaesu  FT1000MP
> Tick    Connect to HF Radio
> |NO tick    Default DTR
> 4800    Baudrate
> 8    Wordlength
> 1    Comport ( but how do I detect which port is now used?  have tried changing it 
> without any luck so far as I thought that this might be the problem
> None    Parity
> 2    Stop bits
> I only use SSB so "Set HF Radio RTTY mode" has a DOT in USB
> "Non serial port type interface" has DOT in NONE
>
> My logging programme works OK so I assume that the transfer of the software to the new 
> computer was done OK...but maybe I am wrong?  Help appreciated; thank you
>
> Hal
> EA5SX
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dxbase at mailman.qth.net
>