[Dxbase] Re: K1EL Win Key

[Chuck Guenther]

Jim,

I think you are experiencing normal operation with the WinKey.  The only
time my speed pot works is when I first power up the computer (before DXBase
is loaded).  The program takes over speed control after that, and the speed
pot is inoperative, even after I close down DXBase.  (Works the same way
with my Omni 6 and TS-850S).

73 de Chuck  NI0C



> Date: Fri, 26 Nov 2004 06:22:36 -0700
> From: "Jim McDonald" <jim at n7us.net>
> Subject: [Dxbase] K1EL's WinKey
> To: "Dxbase Reflector" <dxbase at mailman.qth.net>
> Message-ID: <000001c4d3bb$01391600$0400a8c0 at Dell8300>
> Content-Type: text/plain; charset="us-ascii"
>
> I can't get the speed pot of my new K1EL WinKey to work with DXbase.  I
have
> it connected with three wires and have the POTRANGE set to 255.  I can
vary
> the speed from DXbase but not using the pot.   I have tried setting the
> speed in the DXbase CW parameter screen to 0, thinking that might enable
the
> pot but no luck.  I'll check my wiring.
>
>
>
> I'm using it with a PROII.  Any other parameter tips will be appreciated.
>
> Jim N7US
>
>
>