[DXBase] CW Keying question

Thu, 20 Nov 2003 19:35:30 -0600

Oops, meant to say "not with DXbase" below.  I use DXbase everyday!!!

73, Don

----- Original Message ----- 
From: "Don Hill AA5AU" <[email protected]>
To: <[email protected]>; <[email protected]>
Sent: Thursday, November 20, 2003 7:07 PM
Subject: Re: [DXBase] CW Keying question

> Wow.  Great info.  I use the W1WEF with WriteLog but not DXbase.  I
> started building my own interface box using the W1WEF circuit.  It's described
> at http://www.aa5au.com/rttyinterface.html.  It does CW, FSK & PTT.
> 
> 73, Don AA5AU
> 
> ----- Original Message ----- 
> From: "Larry - K2GN" <[email protected]>
> To: <[email protected]>
> Sent: Thursday, November 20, 2003 6:32 PM
> Subject: Re: [DXBase] CW Keying question
> 
> 
> > Problem solved.
> > 
> > Thanks to Jim, K8IR
> > "While TR and Writelog could key CW, DXBase could not. This was on
> > a computer running Windows 98.  It only happened using the on-board Serial
> > Port.  A plug-in card worked OK.
> > I came up with an interesting solution.  If I ran CWType
> > ( http://www.aalog.com/en/products/cwtype/ ) , minimized it, and ran DXBase,
> > then the CW keying was OK out of DXBase.  Apparently the drivers loaded for
> > CWType provided whatever was missing with DXBase.  This by the way, was with
> > DXBase 2003. "
> > 
> > The Win98 DXbase2003 fix of Jim's worked for me with DXBase2004 and
> > Win2000Pro.
> > 
> > Thanks, Jim
> > 
> > Larry/K2GN
> > 
> > 
> > 
> > _______________________________________________
> > DXBase Reflector - Please visit us on the web at www.dxbase.com
> > - - - - - - - - - - - - - - - - - - - - - - - 
> > To UNSUBSCRIBE please visit:
> > http://mailman.qth.net/mailman/listinfo/dxbase
> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - - 
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
> 