[DXBase] CW Keying question

Thu, 20 Nov 2003 19:07:07 -0600

Wow.  Great info.  I use the W1WEF with WriteLog but not DXbase.  I
started building my own interface box using the W1WEF circuit.  It's described
at http://www.aa5au.com/rttyinterface.html.  It does CW, FSK & PTT.

73, Don AA5AU

----- Original Message ----- 
From: "Larry - K2GN" <[email protected]>
To: <[email protected]>
Sent: Thursday, November 20, 2003 6:32 PM
Subject: Re: [DXBase] CW Keying question

> Problem solved.
> 
> Thanks to Jim, K8IR
> "While TR and Writelog could key CW, DXBase could not. This was on
> a computer running Windows 98.  It only happened using the on-board Serial
> Port.  A plug-in card worked OK.
> I came up with an interesting solution.  If I ran CWType
> ( http://www.aalog.com/en/products/cwtype/ ) , minimized it, and ran DXBase,
> then the CW keying was OK out of DXBase.  Apparently the drivers loaded for
> CWType provided whatever was missing with DXBase.  This by the way, was with
> DXBase 2003. "
> 
> The Win98 DXbase2003 fix of Jim's worked for me with DXBase2004 and
> Win2000Pro.
> 
> Thanks, Jim
> 
> Larry/K2GN
> 
> 
> 
> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - - 
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase