[DXBase] Internet cluster window

Thu, 20 Jun 2002 10:55:52 -0500

You are right.  With Windows2000 and DXB2003 with the telnet window open and
connected to a cluster my cpu usage runs at under 1%.  If I then send 'bye'
to drop the telnet connection the cpu usage rises to 100% and stays there
(at least for the 5 minutes I monitored it), until I close the telnet
window. CPU usage then drops back to under 1%.  It is the DXBase2003.exe
task which shows the usage.

This is quite a surprise!

Ron N5IN

----- Original Message -----
From: "Phil Duff" <[email protected]>
To: <[email protected]>
Sent: Thursday, June 20, 2002 10:22 AM
Subject: [DXBase] Internet cluster window

> I'm curious if any else has noticed this problem in DXB 2001 or later
> versions...
>
> Open a Internet Cluster window and connect to a telnet DX Cluster - if the
> telnet session with the DX Cluster is dropped the computer becomes bogged
> down and the Win XP Task Manager shows CPU Usage at 100% with the
> Dxb2001.exe image consuming 98-99% of the CPU.  Closing the DXB Internet
> window restores CPU Usage back to normal levels.
> This only seems to occur when a DXB Internet cluster session is
> dropped.  With other telnet clients such as the standard XP telnet or
> HyperTerm telnet clients the CPU Usage remains normal when a connection is
> dropped.
>
> 73 Phil NA4M
>
>
> -. .- ....- --   -. .- ....- --   -. .- ....- --   -. .- ....- --   -. .-
> ....- --
> Phil Duff NA4M     [email protected]   Georgetown, Texas
>
>
> _______________________________________________
> DXBase Reflector - Please visit us on the web at www.dxbase.com
> - - - - - - - - - - - - - - - - - - - - - - -
> To UNSUBSCRIBE please visit:
> http://mailman.qth.net/mailman/listinfo/dxbase
>