[Dx4win] Fwd: Querie
John Paul Keon
jpkeon340 at gmail.com
Mon Feb 24 09:19:16 EST 2025
Thank You Mike..... THANK YOU..... THANK YOU.....
I will go read that section again...
I ran out of paper printing out the manual.....
And then realized I printed the 9.02 version... but I guess that is good
Enough.... Hopefully it has all the updates.
Hopefully that will help me out.
John Paul // AB4PP
On Mon, Feb 24, 2025 at 7:13 AM Mike Cizek W0VTT <mgcizek at gmail.com<mailto:mgcizek at gmail.com>> wrote:
Hello Jean Paul,
Look at Files > Preferences > Personal (the first tab). Under the address are windows for Worked Cutoff and Mailed Cutoff. You can enter numbers in these windows and QSOs earlier than that will not appear in reports. I use 3650 (ten years) for worked and 365 for mailed. There is a better explanation of this in the help file under "Worked cutoff".
---
73,
Mike Cizek WØVTT
-----Original Message-----
From: dx4win-bounces at mailman.qth.net<mailto:dx4win-bounces at mailman.qth.net> <dx4win-bounces at mailman.qth.net<mailto:dx4win-bounces at mailman.qth.net>> On Behalf Of John Paul Keon
Sent: Sunday, 23 February, 2025 21:33
To: dx4win at mailman.qth.net<mailto:dx4win at mailman.qth.net>
Subject: [Dx4win] Fwd: Querie
Sent from my iPad
Begin forwarded message:
> From: John Paul Keon <jpkeon340 at gmail.com<mailto:jpkeon340 at gmail.com>>
> Date: February 23, 2025 at 10:30:30 PM EST
> To: "Dx4 Win. Kk4hd" <pvandereijk at gmail.com<mailto:pvandereijk at gmail.com>>
> Subject: Fwd: Querie
>
>
> Sent from my iPad
>
> Begin forwarded message:
>
>> From: John Paul Keon <jpkeon340 at gmail.com<mailto:jpkeon340 at gmail.com>>
>> Date: February 20, 2025 at 8:21:51 PM EST
>> To: dx4win-request at mailman.qth.net<mailto:dx4win-request at mailman.qth.net>
>> Subject: Querie
>>
>>
>> I have an issue that I need to figure and can not find it addressed in the book.
>>
>> I have worked quite a few countries over the years (68 to present)
>> and they are Logged as worked. A lot are singles and some ops were
>> worked several times In a year or two and logged as worked. I did not
>> get QSL cards from them, and Cannot now since some are SK's and others do not QSL any more.
>> How do I mark them so they stay in the log; but, show that I need
>> that country as A NEW ONE, NOT WORKED so that it will identify that
>> way when they show up On the spots page?
>>
>> I want to keep them in the log; but, hide them if possible. Unless I
>> find an old QSL Card in the garage for them that I did not log they are not confirmed.
>>
>> Anyone had this problem and know a solution?
>>
>> Thanks in Advance.
>>
>> John Paul // AB4PP
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net<mailto:DX4WIN at mailman.qth.net>
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
More information about the DX4WIN
mailing list