[Dx4win] Multiple monitors under Windows (W11)

[David Gould]

Hi Mike,

Thanks for that, I have done it and will wait to see what happens.

73,

Dave  G3UEG



On 10/10/2023 14:13, Mike Cizek W0VTT wrote:
> Hello David,
>
> Try writing a new configuration file.  Get all the windows where you want them, then do:
> File > Preferences > File > Write configuration file
> Yes, you want to replace the existing file.  Then, Save changes and exit.
>
> ---
> 73,
> Mike Cizek WØVTT
>
> -----Original Message-----
> From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On Behalf Of David Gould
> Sent: Tuesday, 10 October, 2023 07:57
> To: DX4WIN at mailman.qth.net
> Subject: [Dx4win] Multiple monitors under Windows (W11)
>
> I have a new PC configuration with 3 Monitors ( which I use for general stuff as well Radio).  I am having particular trouble with DX4Win when the PC comes back to life after a sleep/hibernation. I have 9 windows open and some restore to the original position and some re-appear on a different monitor.
>
> If I just minimise DX4Win manually, when I restore it, all the windows come back correctly.
>
> I have the main DX4Win (Title) window wide across one monitor and all the subsidiary one within the width and below it.  Is there any way to "help" DX4Win retain the window positions I select.
>
> The three monitors are coming off a single graphics card with 2 Display Ports and one HDMI, and I am within the total capability of the graphics card.
>
> 73,
>
> Dave G3UEG
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>