[Dx4win] Multiple monitors under Windows (W11)

[Mike Cizek W0VTT]

Hello David,

Try writing a new configuration file.  Get all the windows where you want them, then do:
File > Preferences > File > Write configuration file
Yes, you want to replace the existing file.  Then, Save changes and exit.

---
73,
Mike Cizek WØVTT

-----Original Message-----
From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On Behalf Of David Gould
Sent: Tuesday, 10 October, 2023 07:57
To: DX4WIN at mailman.qth.net
Subject: [Dx4win] Multiple monitors under Windows (W11)

I have a new PC configuration with 3 Monitors ( which I use for general stuff as well Radio).  I am having particular trouble with DX4Win when the PC comes back to life after a sleep/hibernation. I have 9 windows open and some restore to the original position and some re-appear on a different monitor.

If I just minimise DX4Win manually, when I restore it, all the windows come back correctly.

I have the main DX4Win (Title) window wide across one monitor and all the subsidiary one within the width and below it.  Is there any way to "help" DX4Win retain the window positions I select.

The three monitors are coming off a single graphics card with 2 Display Ports and one HDMI, and I am within the total capability of the graphics card.

73,

Dave G3UEG

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html