[Dx4win] Mode using FT8

[Ricardo Navarrete]

Agree with Mike, I use to import my log after a FT8 session.

73 de Rick EA4M

El mié., 21 oct. 2020 14:49, Mike Cizek W0VTT <mgcizek at gmail.com> escribió:

> Hello Bill,
>
> Try this:
> Radio > Ignore Mode in real-time
> This should allow you to select FT8 when logging.
>
> OR - just import your WSJT-X log into DX4WIN every so often.  I find that
> easier.
>
> --
> 73,
> Mike Cizek W0VTT
>
> -----Original Message-----
> From: dx4win-bounces at mailman.qth.net [mailto:
> dx4win-bounces at mailman.qth.net]
> On Behalf Of William Osborne
> Sent: Wednesday, October 21, 2020 07:21
> To: dx4win at mailman.qth.net
> Subject: [Dx4win] Mode using FT8
>
> I am looking for advice.  When working FT8 using my TS890 with the 890
> connected to DX4WIN via virtual 232 port the mode shown in log is SSB when
> the radio actual mode is USB-D (data). If try to log a contact directly
> into
> the log this "SSB" sitting for mode cannot be changed.  The cables and
> connections are all OK as DX4WIN tracks the freq and mode in CW and RTTY
> fine. I think there is a problem in the .rig file but I do not know how to
> fix it.  All help welcome!
>
>
> Thanks,
> Bill...K5ZQ
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>