[Dx4win] Adding CWSkimmer to DX4WIN.TCP

[Radivoj Kar, F6GNZ]

 Guy, thanks. I found the dx4win.tcp  file in dx4win SAVE folder and clicking on Open there was no choice of apps to open it. Win10 ignored that TCP filecould be opened with the Notepad!So, I made a try, started Notepad, selected dx4win.tcp and could add the line: 
SKIMMER>Skimmer,localhost:7301
So, next time I activated cluster window, Skimmer was there , I could select it and the spots were inserted on the spot list and on the Bandmap! (I changed default CWS port from 7300 to 7301 as 7300 was used by the CC User cluster).
So, thanks for an offer, but not needed now.
It would be fine if somebody could advise Microsoft to add all on-PC available and compatible applications to the list shown when one makes click on Open (file). And as an exemple, state the TCP files that can be opened with the Notepad!
73, Radi f6gnz
    Le lundi 3 février 2020 à 13:35:52 UTC+1, ON4AOI <on4aoi at skynet.be> a écrit :  
 
 
Send me your dx4win.tcp and address you like to add

Will check out

  

From: Radivoj Kar, F6GNZ <f6gnz at yahoo.com> 
Sent: Monday, February 3, 2020 1:32 PM
To: 'Jim Reisert AD1C' <jjreisert at alum.mit.edu>; ON4AOI <on4aoi at skynet.be>
Cc: 'REFLECTOR dx4win' <dx4win at mailman.qth.net>
Subject: Re: [Dx4win] Adding CWSkimmer to DX4WIN.TCP

  

Hi Guy,

Thanks, but I am still using v. 8.0.5, waiting v. 9 to stabilise (I see still lot of questions and demands..).

  

That's why I want to add it to the .TCP file..

  

73, Radi f6gnz

  

Le lundi 3 février 2020 à 13:27:27 UTC+1, ON4AOI <on4aoi at skynet.be> a écrit : 

  

  

Radi,
You should be able to add this CW skimmer address to clusters.txt
DX4WIN.TCP is from previous release not 9.xx

Guy ON4AOI - OT7K


-----Original Message-----
From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On Behalf Of Radivoj Kar, F6GNZ via DX4WIN
Sent: Monday, February 3, 2020 1:17 PM
To: Jim Reisert AD1C <jjreisert at alum.mit.edu>; DX4WIN Reflector <dx4win at mailman.qth.net>
Subject: [Dx4win] Adding CWSkimmer to DX4WIN.TCP

Hello,I wish to add CW Skimmer address  to the list of clusters of DX4WIN, but I can't open DX4WIN.TCP to be able to do it.So, any info how could I achieve this??73, Radi f6gnz