[Dx4win] Re :RE: CW Skimmer with DX4WIN ??

[Radivoj Kar, F6GNZ]

Hello Guy and Ricardo, Yes, in my first configuration I was also using the Microham 2 with Router and had interfaced Dx4win over CAT1 and CWS over CAT2 using different com ports for each, and it worked. Later, when I added the G11 SDR controlled by the GSDR (PowerSDR console derivative), I used the DDUtil utility and virtual ports to interface dx4win and CWS with SDR used as RX-only and set DDUtil to use FT1000MP as slave radio for TX-only, synchronised with SDR/CWS frequency. But now, after purchasing the IC7610 for my home station, having it controlled by ic4win application, I wanted to re-use my FT1000MP in my summer QRA south of France, without any additional hardware and control it just by DX4WIN and CWS applications. This was the main reason of asking a question. I have sold my Microkeyer 2 and replaced it with the MK3 connected to the new IC7610 Rig, and do not want to make extra expenses for additional h/w for my summer installation. If Paul wanted to add OmniRig to dx4win, all would have been much easier..Now it seems I'l have to forget using CWS or use OmniRig compatible logger for this site..
73, Radi f6gnz

Envoyé depuis Yahoo Mail pour Android 
 
  Le dim., avr. 19, 2020 à 19:21, ON4AOI<on4aoi at skynet.be> a écrit :   Radi,
This has been working for decades here without any problems.
BUT
You need to have a interface from microKEYER like DXP-MKII-MKIII- MK2R+, USBII etc
In the Device router software you can set for example com1 to your radio (CAT).
and also com2 to your rig (2nd CAT).
In dx4win you can select com1 or com2 for your rig and in CW Skimmer also
But they should not be equal in both programs,
DX4WIN = com1, CWskimmer = com2
Or
DX4WIN = com2, CWskimmer = com1 
Ft1000mp I had long time ago and can confirm that it worked this way also.

Btw over the years I tried out many different software serial splitters, serial bridges etc
But didn't found any that was 100% fool prove working.  

Guy ON4AOI 


-----Original Message-----
From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On Behalf Of Radivoj Kar, F6GNZ via DX4WIN
Sent: Sunday, April 19, 2020 6:06 PM
To: DX4WIN Refelector <dx4win at mailman.qth.net>
Subject: [Dx4win] CW Skimmer with DX4WIN ??

Hi, Has anybody ever been successful on controlling the FT1000MP or other rig with DX4WIN and CW Skimmer??
Both applications can not share the same Rig comport.
If DX4WIN could support OmniRig, it would be easy. LP PAN 1/2 doesn't support FT1000MP, so had anybody found a solution?
73, Radi f6gnz
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html