[Dx4win] CW Skimmer with DX4WIN ??

[ON4AOI]

Radi,
This has been working for decades here without any problems.
BUT
You need to have a interface from microKEYER like DXP-MKII-MKIII- MK2R+, USBII etc
In the Device router software you can set for example com1 to your radio (CAT).
and also com2 to your rig (2nd CAT).
In dx4win you can select com1 or com2 for your rig and in CW Skimmer also
But they should not be equal in both programs,
DX4WIN = com1, CWskimmer = com2
Or
DX4WIN = com2, CWskimmer = com1 
Ft1000mp I had long time ago and can confirm that it worked this way also.

Btw over the years I tried out many different software serial splitters, serial bridges etc
But didn't found any that was 100% fool prove working.   

Guy ON4AOI 


-----Original Message-----
From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On Behalf Of Radivoj Kar, F6GNZ via DX4WIN
Sent: Sunday, April 19, 2020 6:06 PM
To: DX4WIN Refelector <dx4win at mailman.qth.net>
Subject: [Dx4win] CW Skimmer with DX4WIN ??

Hi, Has anybody ever been successful on controlling the FT1000MP or other rig with DX4WIN and CW Skimmer??
Both applications can not share the same Rig comport.
If DX4WIN could support OmniRig, it would be easy. LP PAN 1/2 doesn't support FT1000MP, so had anybody found a solution?
73, Radi f6gnz
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html