[Dx4win] How to open cluster window and bandmap?

[Mike Cizek]

Hello Dennis,

Files > Preferences > Packet1
Type = Regular
COM Port = TCP/IP (unless you're using an external packet modem & 2m)
Baud Rate = 9600
Flow Control = None
Data/Parity = 8 bits/no parity

Packet2

Cluster node auto connect (if you want auto)
Enabled = checked
Node address = choose your favorite, I use VE7CC-1>Whonnock-BC,ve7cc.net
Enter your callsign
Keep alive = 5 (this pings the cluster every 5 minutes, helps keep you 
from getting disconnected)

73,
Mike Cizek W0VTT

On 17-Sep-19 15:47, radioden45 at gmail.com wrote:
> Some how DX4WIN got corrupted ands wouldn't load.  I uninstalled and
> reinstalled (version 9), did the update and connected to my log but all my
> setup files were gone!
>
> I had saved setup pictures of the various tabs for PREFERENCES and so far
> all seems to be working OK...
>
> My question, how do I open the cluster/connect window to start getting spots
> and the bandmap??  Its been so long I forgot, LOL....
>
> Regards, Dennis, k0eoo
>
> -----Original Message-----
> From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On
> Behalf Of Paul van der Eijk
> Sent: Thursday, June 27, 2019 12:59 PM
> To: David Kozinn, K2DBK <k2dbk at arrl.net>
> Cc: DX4WIN Reflector <dx4win at mailman.qth.net>
> Subject: Re: [Dx4win] 9.0.5 Not ignoring dupes during WSJT-x import
>
> I think changing the mode/submode of the old FT4 QSOs will avoid this. When
> matching QSOs for import the sub-mode is now looked at too. See Multiple QSO
> Operations | Change mode/sub-mode; use this after setting a filter!
>
> --Paul
>
> On Thu, Jun 27, 2019 at 1:12 PM David Kozinn, K2DBK <k2dbk at arrl.net> wrote:
>
>> By any chance, were those FT4 QSOs? (That'll only make sense if you're
>> using the most recent release candidate).
>>
>> I saw something similar with my first import, but it was fine after that.
>>
>> -----Original Message-----
>> From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net>
>> On Behalf Of paul.w2le at gmail.com
>> Sent: Thursday, June 27, 2019 10:35 AM
>> To: dx4win at mailman.qth.net
>> Subject: [Dx4win] 9.0.5 Not ignoring dupes during WSJT-x import
>>
>> Importing QSOs from wsjtx_log.adi into DX4WIN log.  Specify to ignore
>> dupes.
>> In 9.0.4 this worked nicely, only importing new QSOs.
>> Now with 9.0.5 it created approximately 140 duplicate QSOs out of
>> 1000+ QSOs in the wsjtx log.
>> These added Qs differ by a minute.
>>
>> The import preferences are the same for both versions of DX4WIN 60 & 1800.
>>
>> Any ideas?
>>
>> Paul  W2LE
>>
>> ______________________________________________________________
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net Please help support this email
>> list: http://www.qsl.net/donate.html
>>
>> ______________________________________________________________
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net Please help support this email
>> list: http://www.qsl.net/donate.html
>>
>
> --
> ~~~~~~~~~~~~~~~~~~~~~
> DX4WIN logging software
> Paul van der Eijk, KK4HD
> BrookHill Data Systems LLC
> http://www.dx4win.com
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html