[Dx4win] How to open cluster window and bandmap?

[radioden45 at gmail.com]

Some how DX4WIN got corrupted ands wouldn't load.  I uninstalled and
reinstalled (version 9), did the update and connected to my log but all my
setup files were gone!  

I had saved setup pictures of the various tabs for PREFERENCES and so far
all seems to be working OK...

My question, how do I open the cluster/connect window to start getting spots
and the bandmap??  Its been so long I forgot, LOL....

Regards, Dennis, k0eoo 

-----Original Message-----
From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> On
Behalf Of Paul van der Eijk
Sent: Thursday, June 27, 2019 12:59 PM
To: David Kozinn, K2DBK <k2dbk at arrl.net>
Cc: DX4WIN Reflector <dx4win at mailman.qth.net>
Subject: Re: [Dx4win] 9.0.5 Not ignoring dupes during WSJT-x import

I think changing the mode/submode of the old FT4 QSOs will avoid this. When
matching QSOs for import the sub-mode is now looked at too. See Multiple QSO
Operations | Change mode/sub-mode; use this after setting a filter!

--Paul

On Thu, Jun 27, 2019 at 1:12 PM David Kozinn, K2DBK <k2dbk at arrl.net> wrote:

> By any chance, were those FT4 QSOs? (That'll only make sense if you're 
> using the most recent release candidate).
>
> I saw something similar with my first import, but it was fine after that.
>
> -----Original Message-----
> From: dx4win-bounces at mailman.qth.net <dx4win-bounces at mailman.qth.net> 
> On Behalf Of paul.w2le at gmail.com
> Sent: Thursday, June 27, 2019 10:35 AM
> To: dx4win at mailman.qth.net
> Subject: [Dx4win] 9.0.5 Not ignoring dupes during WSJT-x import
>
> Importing QSOs from wsjtx_log.adi into DX4WIN log.  Specify to ignore 
> dupes.
> In 9.0.4 this worked nicely, only importing new QSOs.
> Now with 9.0.5 it created approximately 140 duplicate QSOs out of 
> 1000+ QSOs in the wsjtx log.
> These added Qs differ by a minute.
>
> The import preferences are the same for both versions of DX4WIN 60 & 1800.
>
> Any ideas?
>
> Paul  W2LE
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>


--
~~~~~~~~~~~~~~~~~~~~~
DX4WIN logging software
Paul van der Eijk, KK4HD
BrookHill Data Systems LLC
http://www.dx4win.com
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html