[Dx4win] The F9 problem again

[Ian Trusson]

Also I find it tedious having to press F9 every time I start DX4WIN so that
(1) DX4WIN reads my radio frequency and (2) the radio frequency gets
communicated to the ATU in my Expert amp so I am ready to either receive or
transmit and (3) DX4WIN is ready to log my first QSO. Could that not happen
automatically or would that present a problem for some reason? I have
mentioned this before but now might be an opportunity to do something about
this? Certainly this problem does not exist with the contest logging
programs like N1MM.

Regards
Ian G3RVM



-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of Jim Reisert AD1C
Sent: 16 August 2017 18:21
To: Bill
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] DX4WIN Digest, Vol 160, Issue 6

On Wed, Aug 16, 2017 at 9:58 AM, Bill K5ZQ wrote:

> I have another issue I hope is resolved in the new release. When no 
> radio is present or the radio is turned off while to program is 
> running it freezes DX4WIN until the radio times out.

1.  Exit Add Real Time mode (ESC) before turning off the radio, or...

2.  Use Add Off-line from the QSO menu item if you want to keep the logging
window "open".

--
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html