[Dx4win] Can not get DX spots to talk to radio

[RWMaylott at aol.com]

I've had the same problem with my IC-7600.  While the mode  changes OK, it 
only will move the radio if there is a QSX frequency posted, and  it goes 
there fine.  Must be a problem with the parameter file.
 
73, Dick, W2YE
 
 
In a message dated 4/12/2017 8:30:58 P.M. Eastern Daylight Time,  
wa4b at bellsouth.net writes:

I am not  able to get the DX4WIN program to transfer the spot frequency to 
my Icom  7600.  I changed from a windows XP computer that was working fine 
but the  frequency that is displayed on the Icom 7600 always shows up in the 
program's  frequency window.  I turned the CIV Translate off to no avail.  
Any  suggestions are appreciated.  Thanks, Steve -  WA4B
______________________________________________________________
DX4WIN  mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:DX4WIN at mailman.qth.net

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html