[Dx4win] FW: HELP dx4win on new win10 computer

[Howard K2HK]

I do not have that problem with other programs. Comports  3-8. Still playing around and getting somewhat closer eg, win key working.  Working today but tomorrow will try a clean reinstall. Will backup first.

On the road

Sent from my iPad

On Nov 3, 2015, at 6:34 AM, ROBERT DEGRIPPO <kr4da at bellsouth.net> wrote:

> So DX4WIN does not see com ports.
> How about any other program that looks at com ports.
> There are also utilities that you can use to test and see com ports.
> In the WIN 10 devices file what are your com port numbers?
> 
> Bob
> 
> Sent from my iPad
> 
>> On Nov 2, 2015, at 9:00 PM, Dan Violette <danki6x at socal.rr.com> wrote:
>> 
>> Are the port numbers high (above 8)?  I think there is a limit but may be
>> mixing up the programs.  Dan KI6X
>> 
>> -----Original Message-----
>> From: DX4WIN [mailto:dx4win-bounces at mailman.qth.net] On Behalf Of Howard
>> K2HK
>> Sent: Monday, November 2, 2015 4:13 PM
>> To: dx4win dx4
>> Subject: [Dx4win] FW: HELP dx4win on new win10 computer
>> 
>> 
>> 
>> From: howk2 at hotmail.com
>> To: kr4da at bellsouth.net
>> Subject: RE: [Dx4win] HELP dx4win on new win10 computer
>> Date: Mon, 2 Nov 2015 19:12:33 -0500
>> 
>> 
>> 
>> 
>> Bob,Thanks for the reply.To clarify. I do have communication with the USB
>> ports. I have searched for recent drivers and am up-to-date. The FTDI's  do
>> appear in in the device manager. My problem is on the other end . The rs232
>> serials not being seen by DX4win . From DX4win I can not log in to a cluster
>> site. Get no response. Same with the Winkeyer communicating
>> throughDX4win.???Howard
>> 
>>> From: kr4da at bellsouth.net
>>> Subject: Re: [Dx4win] HELP dx4win on new win10 computer
>>> Date: Mon, 2 Nov 2015 16:47:44 -0500
>>> To: howk2 at hotmail.com
>>> 
>>> So your saying you have no communication via your FTDI USB PORTS??
>>> Is any device working via the USB ports? Try a usb memory stick and see if
>> it sees it.
>>> If it does then the USB ports MIGHT be ok.
>>> If you are still having problems using the USB try going to the FTDI web
>> page and download current drivers for your FTDI USB ports.
>>> 
>>> The FTDI you see is it in the WIN 10 devices? Thats where you should 
>>> see your USB ports. If you do not see USB ports, you have a driver issue.
>>> 
>>> Bob
>>> 
>>> Sent from my iPad
>>> 
>>>> On Nov 2, 2015, at 3:57 PM, Howard K2HK <howk2 at hotmail.com> wrote:
>>>> 0 
>>>> Usually can work it out myself but this has me stymied. Copied
>> dx4win8.05 from my win7  computer to win10 computer. New computer has no
>> serial ports but I have FTDI interface that shows up in the device manager
>> as working.  Dx4win starts up but can not connect to internet connections. I
>> am using a Winkey as well which does not respond to the selected serial
>> ports. Running out f ideas. Any help?Howard...K2Hk                         
>>>> ______________________________________________________________
>>>> DX4WIN mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:DX4WIN at mailman.qth.net
>>>> 
>>>> This list hosted by: http://www.qsl.net Please help support this 
>>>> email list: http://www.qsl.net/donate.html
>> 
>> 
>> ______________________________________________________________
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> 
>> ______________________________________________________________
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html