[Dx4win] FW: HELP dx4win on new win10 computer

[ROBERT DEGRIPPO]

So DX4WIN does not see com ports.
How about any other program that looks at com ports.
There are also utilities that you can use to test and see com ports.
In the WIN 10 devices file what are your com port numbers?

Bob

Sent from my iPad

> On Nov 2, 2015, at 9:00 PM, Dan Violette <danki6x at socal.rr.com> wrote:
> 
> Are the port numbers high (above 8)?  I think there is a limit but may be
> mixing up the programs.  Dan KI6X
> 
> -----Original Message-----
> From: DX4WIN [mailto:dx4win-bounces at mailman.qth.net] On Behalf Of Howard
> K2HK
> Sent: Monday, November 2, 2015 4:13 PM
> To: dx4win dx4
> Subject: [Dx4win] FW: HELP dx4win on new win10 computer
> 
> 
> 
> From: howk2 at hotmail.com
> To: kr4da at bellsouth.net
> Subject: RE: [Dx4win] HELP dx4win on new win10 computer
> Date: Mon, 2 Nov 2015 19:12:33 -0500
> 
> 
> 
> 
> Bob,Thanks for the reply.To clarify. I do have communication with the USB
> ports. I have searched for recent drivers and am up-to-date. The FTDI's  do
> appear in in the device manager. My problem is on the other end . The rs232
> serials not being seen by DX4win . From DX4win I can not log in to a cluster
> site. Get no response. Same with the Winkeyer communicating
> throughDX4win.???Howard
> 
>> From: kr4da at bellsouth.net
>> Subject: Re: [Dx4win] HELP dx4win on new win10 computer
>> Date: Mon, 2 Nov 2015 16:47:44 -0500
>> To: howk2 at hotmail.com
>> 
>> So your saying you have no communication via your FTDI USB PORTS??
>> Is any device working via the USB ports? Try a usb memory stick and see if
> it sees it.
>> If it does then the USB ports MIGHT be ok.
>> If you are still having problems using the USB try going to the FTDI web
> page and download current drivers for your FTDI USB ports.
>> 
>> The FTDI you see is it in the WIN 10 devices? Thats where you should 
>> see your USB ports. If you do not see USB ports, you have a driver issue.
>> 
>> Bob
>> 
>> Sent from my iPad
>> 
>>> On Nov 2, 2015, at 3:57 PM, Howard K2HK <howk2 at hotmail.com> wrote:
>>> 0 
>>> Usually can work it out myself but this has me stymied. Copied
> dx4win8.05 from my win7  computer to win10 computer. New computer has no
> serial ports but I have FTDI interface that shows up in the device manager
> as working.  Dx4win starts up but can not connect to internet connections. I
> am using a Winkey as well which does not respond to the selected serial
> ports. Running out f ideas. Any help?Howard...K2Hk                         
>>> ______________________________________________________________
>>> DX4WIN mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:DX4WIN at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net Please help support this 
>>> email list: http://www.qsl.net/donate.html
> 
> 
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html