[Dx4win] mmtty

[Courtney Judd]

found another isue very similiar. I tried to get DX4WIN to use WINKEY 
which works great in Writelog using the key or F messages. In DX4WIN the 
key will work but when you open the keyboard window a message pops up 
saying that it could not open the winkey port... something in DX4WIN is 
not working with the router... ideas? Cort
> Joe Subich, W4TV <mailto:lists at subich.com>
> Tuesday, February 03, 2015 9:00 AM
>
> Cort,
>
> As always, start with the example configuration for DX4Win and MK II
> from microHAM.  In Router (Help | Download Documents) or on-line in
> the MK II area at www.microham-USA.com/support.html.
>
> DX4Win's support for MMTTY is a bit strange in FSK in that you must
> run MMTTY stand alone from the same path as used in DX4Win to configure
> the FSK port and set Configure MMTTY | MISC | TX Port to "COM-TxD(FSK)"
> because there is no way to pass the port/FSK setting from the DX4Win
> MMTTY window.
>
> 73,
>
>    ... Joe, W4TV
>
>
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>